The twin-screw extruder refers to the fact that in the dispersion in which the solid powder and the liquid coexist and is mainly composed of a solid phase, the basic particles of the solid powder are adhered to each other and increased in a forced manner by using the self-adhesion of the dispersion. And form a certain shape and size of uniform, concentrated particles. Below for everyone to briefly explain about power saving better maintenance of twin-screw extruder approach?

1. If abnormal sound occurs during operation of the twin-screw extruder, stop immediately for inspection or repair.

2. The twin-screw extruder does not allow empty cars to run so as not to damage the screw and the machine.

3, the inspection of the machine parts: the need to extract the screw inspection, measurement, identification, and according to the wear of parts and components have replaced the required wear limit of the parts, repair damaged parts.

4, regular maintenance time: we usually in the twin-screw extruder running after 2500-5000h after the shutdown for regular maintenance.

5. When the twin-screw extruder needs to be stopped for a long time, the screw of the twin-screw extruder should be placed in the machine frame and should not be taken out. The operative surface such as the machine head should be coated with anti-rust grease. Calibrate the temperature control instrument regularly to check the correctness of the adjustment and the sensitivity of the control.

6, prevent metal or other debris falling into the hopper, so as not to damage the screw and barrel. In order to prevent iron debris from entering the barrel, a magnetic frame may be installed at the material inlet of the barrel; or the material may be sieved in advance.